No image available
For Your Next Discovery｜SpecRock｜ Other Products
USD 111.82
Other Products / General Merchandise / Other Products
SpecRock is a pourable, cement-based anchoring cement that sets hard in 12-15 minutes and expands as it cures for a secure, non-shrinking lock
SpecRock is a one-component, waterproof, non-shrink, Portland cement-based anchoring cement. It expands slightly as it sets, locking firmly into the surrounding concrete. SpecRock ES (Extended Set) offers a longer 60-75 minute set time, making it better suited for hot weather placement above 90°F.
Key Features & Benefits
Quick setting — hardens in 12-15 minutes to speed up production
Rapid high strength — up to 2,000 psi in 1 hour at 72°F
Controlled expansion for a secure anchor lock
Nonmetallic, with stable volume over time
Waterproof and freeze/thaw resistant for long-lasting durability
Flowable, pourable consistency for easy placement
Approved for exterior use and direct water exposure
Common Applications
Used to securely anchor bolts, reinforcing rods, and columns; railings, fences, and small machines; handrails, bridge railings, and posts; and signs, pulleys, and motors.
Application Instructions
Drill holes into sound concrete roughly three times wider than the embedded object
Ensure holes allow material to flow easily around the object; optionally "mushroom" the base of the hole for added anchorage
Clean out all dust and debris, and dampen (without saturating) the hole walls
Mix only what can be used within 8 minutes, to a pancake-batter consistency, using approximately 16.7% water by weight
Pour continuously to avoid air pockets, ensuring full contact with the base plate — minimum placement thickness of 1 inch, maximum 18 inches per lift
For high-flow applications, aggregate can be reduced up to 25% by weight for easier placement
Technical Data Summary
Compressive Strength: 2,000 psi at 1 hour, 5,000 psi at 1 day, 8,000 psi at 28 days
Flexural Strength: 1,250 psi at 28 days
Pull-Out Strength: Up to 19,300 lbs, depending on anchor and depth
Packaging
Available in 50 lb pails or bags.
Shelf Life & Storage
18 months when stored properly in a cool, dry area between 45°F and 90°F.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:SROCK-50-PAILTags:Cementitious Products and LiquidsSize:50 LB Pail (Pack of 6)
View productSpecRock is a one-component, waterproof, non-shrink, Portland cement-based anchoring cement. It expands slightly as it sets, locking firmly into the surrounding concrete. SpecRock ES (Extended Set) offers a longer 60-75 minute set time, making it better suited for hot weather placement above 90°F.
Key Features & Benefits
Quick setting — hardens in 12-15 minutes to speed up production
Rapid high strength — up to 2,000 psi in 1 hour at 72°F
Controlled expansion for a secure anchor lock
Nonmetallic, with stable volume over time
Waterproof and freeze/thaw resistant for long-lasting durability
Flowable, pourable consistency for easy placement
Approved for exterior use and direct water exposure
Common Applications
Used to securely anchor bolts, reinforcing rods, and columns; railings, fences, and small machines; handrails, bridge railings, and posts; and signs, pulleys, and motors.
Application Instructions
Drill holes into sound concrete roughly three times wider than the embedded object
Ensure holes allow material to flow easily around the object; optionally "mushroom" the base of the hole for added anchorage
Clean out all dust and debris, and dampen (without saturating) the hole walls
Mix only what can be used within 8 minutes, to a pancake-batter consistency, using approximately 16.7% water by weight
Pour continuously to avoid air pockets, ensuring full contact with the base plate — minimum placement thickness of 1 inch, maximum 18 inches per lift
For high-flow applications, aggregate can be reduced up to 25% by weight for easier placement
Technical Data Summary
Compressive Strength: 2,000 psi at 1 hour, 5,000 psi at 1 day, 8,000 psi at 28 days
Flexural Strength: 1,250 psi at 28 days
Pull-Out Strength: Up to 19,300 lbs, depending on anchor and depth
Packaging
Available in 50 lb pails or bags.
Shelf Life & Storage
18 months when stored properly in a cool, dry area between 45°F and 90°F.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:SROCK-50-PAILTags:Cementitious Products and LiquidsSize:50 LB Pail (Pack of 6)
Product details
SpecRock is a pourable, cement-based anchoring cement that sets hard in 12-15 minutes and expands as it cures for a secure, non-shrinking lock
SpecRock is a one-component, waterproof, non-shrink, Portland cement-based anchoring cement. It expands slightly as it sets, locking firmly into the surrounding concrete. SpecRock ES (Extended Set) offers a longer 60-75 minute set time, making it better suited for hot weather placement above 90°F.
Key Features & Benefits
Quick setting — hardens in 12-15 minutes to speed up production
Rapid high strength — up to 2,000 psi in 1 hour at 72°F
Controlled expansion for a secure anchor lock
Nonmetallic, with stable volume over time
Waterproof and freeze/thaw resistant for long-lasting durability
Flowable, pourable consistency for easy placement
Approved for exterior use and direct water exposure
Common Applications
Used to securely anchor bolts, reinforcing rods, and columns; railings, fences, and small machines; handrails, bridge railings, and posts; and signs, pulleys, and motors.
Application Instructions
Drill holes into sound concrete roughly three times wider than the embedded object
Ensure holes allow material to flow easily around the object; optionally "mushroom" the base of the hole for added anchorage
Clean out all dust and debris, and dampen (without saturating) the hole walls
Mix only what can be used within 8 minutes, to a pancake-batter consistency, using approximately 16.7% water by weight
Pour continuously to avoid air pockets, ensuring full contact with the base plate — minimum placement thickness of 1 inch, maximum 18 inches per lift
For high-flow applications, aggregate can be reduced up to 25% by weight for easier placement
Technical Data Summary
Compressive Strength: 2,000 psi at 1 hour, 5,000 psi at 1 day, 8,000 psi at 28 days
Flexural Strength: 1,250 psi at 28 days
Pull-Out Strength: Up to 19,300 lbs, depending on anchor and depth
Packaging
Available in 50 lb pails or bags.
Shelf Life & Storage
18 months when stored properly in a cool, dry area between 45°F and 90°F.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:SROCK-50-PAILTags:Cementitious Products and LiquidsSize:50 LB Pail (Pack of 6)
SpecRock is a one-component, waterproof, non-shrink, Portland cement-based anchoring cement. It expands slightly as it sets, locking firmly into the surrounding concrete. SpecRock ES (Extended Set) offers a longer 60-75 minute set time, making it better suited for hot weather placement above 90°F.
Key Features & Benefits
Quick setting — hardens in 12-15 minutes to speed up production
Rapid high strength — up to 2,000 psi in 1 hour at 72°F
Controlled expansion for a secure anchor lock
Nonmetallic, with stable volume over time
Waterproof and freeze/thaw resistant for long-lasting durability
Flowable, pourable consistency for easy placement
Approved for exterior use and direct water exposure
Common Applications
Used to securely anchor bolts, reinforcing rods, and columns; railings, fences, and small machines; handrails, bridge railings, and posts; and signs, pulleys, and motors.
Application Instructions
Drill holes into sound concrete roughly three times wider than the embedded object
Ensure holes allow material to flow easily around the object; optionally "mushroom" the base of the hole for added anchorage
Clean out all dust and debris, and dampen (without saturating) the hole walls
Mix only what can be used within 8 minutes, to a pancake-batter consistency, using approximately 16.7% water by weight
Pour continuously to avoid air pockets, ensuring full contact with the base plate — minimum placement thickness of 1 inch, maximum 18 inches per lift
For high-flow applications, aggregate can be reduced up to 25% by weight for easier placement
Technical Data Summary
Compressive Strength: 2,000 psi at 1 hour, 5,000 psi at 1 day, 8,000 psi at 28 days
Flexural Strength: 1,250 psi at 28 days
Pull-Out Strength: Up to 19,300 lbs, depending on anchor and depth
Packaging
Available in 50 lb pails or bags.
Shelf Life & Storage
18 months when stored properly in a cool, dry area between 45°F and 90°F.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:SROCK-50-PAILTags:Cementitious Products and LiquidsSize:50 LB Pail (Pack of 6)
Product information
COL-a85eeac9a5de251ca27bd1c3554c8f0b8dd7151f
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products
![Something for Your List｜ Fashion Accessories ｜SaltStick Caps [30ct Bottle]](https://cdn.shopify.com/s/files/1/0878/6811/3205/files/Saltcaps30ct_1.png)
