No image available
Ultimate Silicone - Case of 12｜ Other Products
USD 46.76
Other Products / General Merchandise / Other Products
Maximum Performance Sealant
The Gold Standard
Bond It Ultimate Silicone lives up to its name as the ultimate choice in silicone sealants, delivering unmatched performance where it matters most. This ultra-premium, 100% silicone sealant provides maximum performance in almost any application, including sealing out air and water in a variety of indoor and outdoor applications. Ultimate Silicone offers superior flexibility, 500% elongation, and excellent adhesion to withstand contraction and expansion caused by temperature and weather fluctuations without cracking, shrinking, or losing adhesion. This sealant is neutral curing with low odor and will not blemish metal surfaces or bleed into porous/natural stone. It contains a long-lasting powerful fungicide to prevent mold growth for up to 10 years. Bond It Ultimate Silicone creates a 100% waterproof, weatherproof seal, excelling in the most demanding environments with reliable performance and exceptional durability. Meets ASTM C920, Type S, Grade NS, Use NT, G, A, O. Class 50. Exterior/Interior.
Typical Uses: Ideal for a wide range of sealing applications, including sanitary, ducting, high-temperature environments, framework, siding, trim, flashing, pipes, vents, and natural stone. It exhibits excellent adhesion to metals, mirrors, natural stone (such as granite, travertine, and marble), porcelain, painted and unpainted wood, ceramic, vinyl, plastics, drywall, composite materials, fiber cement board, fiberglass, stone, PVCu, concrete, plaster, and VSG glass.
Instructions: Surfaces must be clean, dry, and dust/grease free. Cut the tip of the cartridge without damaging the threaded area. Screw on nozzle and cut at an angle of 45° to an opening slightly larger than the gap to be sealed. Apply the sealant using a standard caulking gun and tool it down within 10 minutes using the appropriate tool. Remove excess material promptly and clean tools with mineral spirits before the product dries. For deep joints, use foam backer rods to minimize wastage and ensure optimal sealing.
Limitations: Not suitable for applications in direct contact with aquatic life, such as fish tanks. Avoid use on oil-based substrates like bitumen, asphalt, or tar. Not suitable for painting over. Not suitable for showers until material is fully cured. Not suitable for permanent immersion in water. Wait until the sealant has fully cured before exposing it to high-pressure washer jets.
Storage: Store in cool, dry conditions, at a temperature between 41°F (5°C) and 77°F (25°C). Use within 12 months from date of manufacture.
Guarantee: Manufacturer warrants the performance of this product when used as directed for one year from date of purchase. Call 1 (800) 587-9940 with your sales receipt and product container for replacement product or sales price refund. Manufacturer and reseller are not liable for incidental or consequential damages.
Brand:Bond ItSKU:DD211854Tags:Silicone SealantColors:Clear, White
View productThe Gold Standard
Bond It Ultimate Silicone lives up to its name as the ultimate choice in silicone sealants, delivering unmatched performance where it matters most. This ultra-premium, 100% silicone sealant provides maximum performance in almost any application, including sealing out air and water in a variety of indoor and outdoor applications. Ultimate Silicone offers superior flexibility, 500% elongation, and excellent adhesion to withstand contraction and expansion caused by temperature and weather fluctuations without cracking, shrinking, or losing adhesion. This sealant is neutral curing with low odor and will not blemish metal surfaces or bleed into porous/natural stone. It contains a long-lasting powerful fungicide to prevent mold growth for up to 10 years. Bond It Ultimate Silicone creates a 100% waterproof, weatherproof seal, excelling in the most demanding environments with reliable performance and exceptional durability. Meets ASTM C920, Type S, Grade NS, Use NT, G, A, O. Class 50. Exterior/Interior.
Typical Uses: Ideal for a wide range of sealing applications, including sanitary, ducting, high-temperature environments, framework, siding, trim, flashing, pipes, vents, and natural stone. It exhibits excellent adhesion to metals, mirrors, natural stone (such as granite, travertine, and marble), porcelain, painted and unpainted wood, ceramic, vinyl, plastics, drywall, composite materials, fiber cement board, fiberglass, stone, PVCu, concrete, plaster, and VSG glass.
Instructions: Surfaces must be clean, dry, and dust/grease free. Cut the tip of the cartridge without damaging the threaded area. Screw on nozzle and cut at an angle of 45° to an opening slightly larger than the gap to be sealed. Apply the sealant using a standard caulking gun and tool it down within 10 minutes using the appropriate tool. Remove excess material promptly and clean tools with mineral spirits before the product dries. For deep joints, use foam backer rods to minimize wastage and ensure optimal sealing.
Limitations: Not suitable for applications in direct contact with aquatic life, such as fish tanks. Avoid use on oil-based substrates like bitumen, asphalt, or tar. Not suitable for painting over. Not suitable for showers until material is fully cured. Not suitable for permanent immersion in water. Wait until the sealant has fully cured before exposing it to high-pressure washer jets.
Storage: Store in cool, dry conditions, at a temperature between 41°F (5°C) and 77°F (25°C). Use within 12 months from date of manufacture.
Guarantee: Manufacturer warrants the performance of this product when used as directed for one year from date of purchase. Call 1 (800) 587-9940 with your sales receipt and product container for replacement product or sales price refund. Manufacturer and reseller are not liable for incidental or consequential damages.
Brand:Bond ItSKU:DD211854Tags:Silicone SealantColors:Clear, White
Product details
Maximum Performance Sealant
The Gold Standard
Bond It Ultimate Silicone lives up to its name as the ultimate choice in silicone sealants, delivering unmatched performance where it matters most. This ultra-premium, 100% silicone sealant provides maximum performance in almost any application, including sealing out air and water in a variety of indoor and outdoor applications. Ultimate Silicone offers superior flexibility, 500% elongation, and excellent adhesion to withstand contraction and expansion caused by temperature and weather fluctuations without cracking, shrinking, or losing adhesion. This sealant is neutral curing with low odor and will not blemish metal surfaces or bleed into porous/natural stone. It contains a long-lasting powerful fungicide to prevent mold growth for up to 10 years. Bond It Ultimate Silicone creates a 100% waterproof, weatherproof seal, excelling in the most demanding environments with reliable performance and exceptional durability. Meets ASTM C920, Type S, Grade NS, Use NT, G, A, O. Class 50. Exterior/Interior.
Typical Uses: Ideal for a wide range of sealing applications, including sanitary, ducting, high-temperature environments, framework, siding, trim, flashing, pipes, vents, and natural stone. It exhibits excellent adhesion to metals, mirrors, natural stone (such as granite, travertine, and marble), porcelain, painted and unpainted wood, ceramic, vinyl, plastics, drywall, composite materials, fiber cement board, fiberglass, stone, PVCu, concrete, plaster, and VSG glass.
Instructions: Surfaces must be clean, dry, and dust/grease free. Cut the tip of the cartridge without damaging the threaded area. Screw on nozzle and cut at an angle of 45° to an opening slightly larger than the gap to be sealed. Apply the sealant using a standard caulking gun and tool it down within 10 minutes using the appropriate tool. Remove excess material promptly and clean tools with mineral spirits before the product dries. For deep joints, use foam backer rods to minimize wastage and ensure optimal sealing.
Limitations: Not suitable for applications in direct contact with aquatic life, such as fish tanks. Avoid use on oil-based substrates like bitumen, asphalt, or tar. Not suitable for painting over. Not suitable for showers until material is fully cured. Not suitable for permanent immersion in water. Wait until the sealant has fully cured before exposing it to high-pressure washer jets.
Storage: Store in cool, dry conditions, at a temperature between 41°F (5°C) and 77°F (25°C). Use within 12 months from date of manufacture.
Guarantee: Manufacturer warrants the performance of this product when used as directed for one year from date of purchase. Call 1 (800) 587-9940 with your sales receipt and product container for replacement product or sales price refund. Manufacturer and reseller are not liable for incidental or consequential damages.
Brand:Bond ItSKU:DD211854Tags:Silicone SealantColors:Clear, White
The Gold Standard
Bond It Ultimate Silicone lives up to its name as the ultimate choice in silicone sealants, delivering unmatched performance where it matters most. This ultra-premium, 100% silicone sealant provides maximum performance in almost any application, including sealing out air and water in a variety of indoor and outdoor applications. Ultimate Silicone offers superior flexibility, 500% elongation, and excellent adhesion to withstand contraction and expansion caused by temperature and weather fluctuations without cracking, shrinking, or losing adhesion. This sealant is neutral curing with low odor and will not blemish metal surfaces or bleed into porous/natural stone. It contains a long-lasting powerful fungicide to prevent mold growth for up to 10 years. Bond It Ultimate Silicone creates a 100% waterproof, weatherproof seal, excelling in the most demanding environments with reliable performance and exceptional durability. Meets ASTM C920, Type S, Grade NS, Use NT, G, A, O. Class 50. Exterior/Interior.
Typical Uses: Ideal for a wide range of sealing applications, including sanitary, ducting, high-temperature environments, framework, siding, trim, flashing, pipes, vents, and natural stone. It exhibits excellent adhesion to metals, mirrors, natural stone (such as granite, travertine, and marble), porcelain, painted and unpainted wood, ceramic, vinyl, plastics, drywall, composite materials, fiber cement board, fiberglass, stone, PVCu, concrete, plaster, and VSG glass.
Instructions: Surfaces must be clean, dry, and dust/grease free. Cut the tip of the cartridge without damaging the threaded area. Screw on nozzle and cut at an angle of 45° to an opening slightly larger than the gap to be sealed. Apply the sealant using a standard caulking gun and tool it down within 10 minutes using the appropriate tool. Remove excess material promptly and clean tools with mineral spirits before the product dries. For deep joints, use foam backer rods to minimize wastage and ensure optimal sealing.
Limitations: Not suitable for applications in direct contact with aquatic life, such as fish tanks. Avoid use on oil-based substrates like bitumen, asphalt, or tar. Not suitable for painting over. Not suitable for showers until material is fully cured. Not suitable for permanent immersion in water. Wait until the sealant has fully cured before exposing it to high-pressure washer jets.
Storage: Store in cool, dry conditions, at a temperature between 41°F (5°C) and 77°F (25°C). Use within 12 months from date of manufacture.
Guarantee: Manufacturer warrants the performance of this product when used as directed for one year from date of purchase. Call 1 (800) 587-9940 with your sales receipt and product container for replacement product or sales price refund. Manufacturer and reseller are not liable for incidental or consequential damages.
Brand:Bond ItSKU:DD211854Tags:Silicone SealantColors:Clear, White
Product information
COL-01f8ae27e477a4470b1b2ee8ba3e5b3d7dae7d03
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products
