Headlight Restoration Polish — 3-Minute Clarity｜ Other Products

200 g Headlight Polishing Paste — From Foggy to Clear in Just 3 Minutes

Swipe-Away Oxidation Remedy

Micro-abrasive cream breaks down yellow film, haze and road grime—no sandpaper needed. A single pass lifts the dull layer before your eyes.

Crystal Shield Lasts 12 Months

Seals lenses with a clear, high-density coat that blocks UV rays and endures heat up to 120 °C, guarding brilliance whatever the weather.

Up to 3× Brighter Beam • Extra 6 s Reaction*

Renewed transparency tightens the beam pattern, projects light farther and lessens glare for on-coming traffic.

Big 200 g Jar Treats 10+ Pairs

Generous net weight covers roughly 20 000 cm²—perfect for cars, SUVs, motorcycles and even boat windscreens.

Apply, Buff & Admire

Glove up, spread the paste, buff with microfiber, rinse—done! Soft cloths handle light-to-moderate haze—no drills or sanding blocks required.

Specifications

Net Content
200 g / 7.1 oz

Formula
Water-based polymer, fine alumina, UV sealant

Coverage
≈ 12 headlights (20 000 cm²)

Finish
Clear gloss, hydrophobic

Heat Resistance
-20 °C – 120 °C

Shelf Life
24 months (sealed)

FAQ

Q 1 | Will the paste scratch my lenses?
No—the ultra-fine polish smooths without scratching. Use only microfiber cloths.

Q 2 | How long does the clarity remain?
Typically around 12 months in normal conditions; re-apply once haze returns.

Q 3 | Do I need sanding or a buffer?
Not for mild or moderate oxidation. Deep pitting may call for pre-wet-sanding with 800-1200-grit paper.

Q 4 | Is it safe on taillights or visor shields?
Yes—the blend is compatible with polycarbonate, PMMA and acrylic plastics.
Brand:LazzdaStyle:A, B