Other Products ｜GreenGuard GG40-LG XPS Insulation Board - 4"

ASTM C578Type VI closed–cell extruded polystyrene (XPS) with a minimum compressive strength of 40 psi, produced with a blowing agent blend for GWP of less than 50.
Designed for high-load applications such as high-load floor and roofing systems, ice rinks, roadways as well as plaza and parking decks. It has high water resistance & an R–value of 5.0 per inch. It retains its insulating properties over time.

Product Highlights

ASTM C578 Type VI XPS Insulation Board
Blowing agent blend for GWP of less than 50
For high-load applications - 40 psi
More moisture resistant than standard EP

Product Data Table

More Moisture Resistant than Standard EPS
Designed for high-load applications such as high load floor and roofing systems, ice rinks, roadways as well as plaza and parking decks.
Is it OK to install the building wrap upside down, sideways, or with the printing facing the wall?
In the case of RainDrop® building wrap, the product must be installed with the correct side to the exterior and the drainage channels vertical, or at a slight angle from vertical, for the product to function properly. (Horizontal drainage channels do not really work.) Performance of flat wraps is not particularly affected by install direction, from a fabric perspective. However, installing wrap consistently indicates that you have followed guidelines to achieve a proper water-resistive barrier. Care should be taken to install the wrap in a shingling fashion (check local codes for overlap requirements). In addition, the appearance of the final job sends a message. You can guess what message a sloppy, inconsistent installation sends.
Does fanfold provide good insulation value?
The primary purpose of fanfold is to level out the walls, so the new siding goes on straight. Fanfold does provide some additional R-Value to the wall depending on the thickness.
What's the R-Value of vacuum insulation?
Kingspan OPTIM-R has a design R-value of 28.
Why choose vacuum insulation panels?
VIPs provide the thinnest possible solution to insulation problems, while also providing an insulating performance that is up to five times better than commonly used insulation materials.
What Is KoolDuct made of?
The KoolDuct panels comprise a rigid closed cell non-fibrous phenolic insulation core faced on both sides with a protective 25-micron (1 mil) aluminum foil with low vapor permeability and reinforced with a 5 mm (0.2”) glass scrim.
Documents

Precast Brochure
Environmental Product Sheet
Insulation Board Line Sheets
Product Data Sheet
Safety Data Sheet (SDS)
Technical Bulletins
Installation Guides
15 Year Warranty
50 Year Warranty

Technical Info
GreenGuard GG40-LG can be used in residential, commercial, etc. applications.
GreenGuard is Extruded Polystyrene (XPS)
GreenGuard LG 40 is 4' wide by 8' long
Code Compliance

Code Compliance Research Reports: CCRR-1021
Brand:KingspanSKU:M28300TYP6LG-4Tags:Building Materials, Insulation BoardSize/Quantity:4" x 4' x 8' Square Edge